Automatic drain valve of the air pipeline


 

The power source of compressing air as equipment and tools in factories is becoming more and more common, so compressed air pipelines in factory workshops are getting longer and longer.
The temperature is getting lower and lower during the transportation process from the air compressor from the air compressor. The water in the air is condensed. ,dust. If such air enters equipment and air components, it will damage the above components, shorten the service life of the equipment, and reduce the non -fault running time of the equipment. Therefore, modern factory equipment managers can do everything possible to dry the air, and the dryers, filters and other means are all available. The investment is huge, but the effect is not obvious, because the temperature decreases after drying the temperature (the ambient temperature decreases or is instantaneous instantaneous. The volume expansion) will condense water again, and water doped, rust, and dust will quickly block the filter. Therefore, the best way is to quickly discharge the pipeline after water condensation. Or equipment. Conventional self -intensive drainors (such as SMC AD series) are prone to failure and often blockage because the mechanism is complex and small in diameter.
The RFT series electronic automatic drain valve is to make full use of the excellent passability of the RFT coaxial valve and the excellent passability of granular resistance. In addition, the intelligent controller that can be adjusted at will, so that the emissions of pollutants are not difficult and indispensable control.
The valve diameter from DN10 to DN200, the interface can be threaded or flange, controlling voltage DC 24V and AC 220V can be provided. You can choose explosion -proof coils.
The emission time can be set to 0.5s to 30s, and the interval can be 1 minute to 24 hours.
This valve can also apply the empty excretion process section under the gas storage tank and liquid storage tank.

Related Applications


undefined

undefined